about this project

Structural engineering design of a new 7,261.55 sq. ft. (674.62 m²) retail store for the LCBO, developed as Building D within the SmartCentres Port Elgin retail plaza.

• Core-and-shell construction with tenant fit-up delivered under a separate permit
• Steel-framed structure with brick veneer and aluminum composite panel façade, storefront glazing, and a decorative tension-rod canopy at the main entrance
  
• Walkie-reach loading dock with inflatable dock shelter and motorized high-lift door
  
• Roof designed to accommodate future LCBO rooftop condensing units, coldroom support, and tenant service platform loads
  
• Slab-on-grade designed to CSA floor flatness/levelness standards for retail racking and fixture loads
  

about this project

Structural engineering design of a new 340 sq. m. (3,660 sf) single-storey CIBC banking centre, developed as Building C within a multi-tenant commercial campus for Ornstock Developments Limited.

• Standalone core-and-shell building with a distinctive red ACM panel and brick masonry façade, curtain wall glazing, and illuminated channel letter signage
  
• Storefront canopy with cantilevered parapet detailing and spandrel glazing
  
• Barrier-free accessible entrance with dedicated accessible parking
  
• Coordinated within an active commercial plaza, including shared fire routes, landscape setbacks, and parking allocations
  
• Rooftop mechanical layout accommodating RTUs, condensing units, and exhaust fans sized to tenant load
  

about this project

Structural Structural engineering design of a new 13,175 sq. ft. two-storey truck rental and repair facility, combining an office/administration wing with a four-bay service garage, EV charging station, and fuel island.



• Ground floor repair garage with four service bays, dock leveler, and high-lift overhead doors sized for truck access
• Second-floor office space above the garage, including boardroom, open staff area, and mechanic's lounge
• Curved-canopy EV charging station and fuel island structures with exposed steel framing
• Retaining walls and loading ramp coordination for grade changes across the site
• Structural steel framing throughout, with 2-hour fire separation at the repair garage per OBC 3.3.5.5

about this project

Structural engineering design of a new 4,847 sq. ft. (450 m²) single-storey daycare facility, developed as Building J within a multi-tenant commercial campus for Ornstock Developments Limited.

• Five classrooms accommodating up to 76 children, with dedicated shared washrooms and support spaces
• Standalone core-and-shell building with brick masonry and architectural stone façade, storefront glazing, and prefinished metal canopy entries
• OBC Group A2 Assembly occupancy classification, sprinklered throughout with 0.75-hour fire separation at floors over basement
• Coordinated within an active commercial plaza, including shared fire routes, parking, loading, and landscape setbacks
• Roof designed for low-slope drainage with tapered insulation, integral roof drains, and canopy drainage at building entries
  

about this project

Structural engineering design of a new 9,625 sq. ft. (895 m²) single-storey multi-tenant commercial retail building, developed as Building H within a multi-tenant commercial campus for Ornstock Developments Limited.

• Seven commercial retail units (CRUs) ranging from 923 to 2,621 sq. ft., designed for flexible tenant fit-out
• Core-and-shell construction with brick masonry and stone base façade, storefront glazing, and individually signed tenant bays
• OBC Group A2 Assembly / Personal Service Shops occupancy, sprinklered throughout with 0.75-hour fire separation at the foundation floor
• Egress designed with dedicated exits and fire-rated separations between individual tenant units
• Coordinated within an active commercial plaza, including shared fire routes, parking, and landscape setbacks
  

about this project

Structural engineering design of a new single-storey, 8,014 sq. ft. (895 m²) retail building for Winners, within the Keswick Marketplace development for Craft Development Corporation.

• Steel frame structure with braced bays and long-span roof framing to create an open, column-light retail floor plate
• Foundation and slab-on-grade design coordinated with future tenant fit-out loading
• Structural coordination with mezzanine/office area framing above the entrance vestibule
• 0.75-hour fire separation at the foundation floor per OBC requirements
• Construction administration through steel erection, including field review of the primary frame, bracing, and roof deck installation